DynaVap UniDyn in figures: 10.9 cm, 17 g, 150–230 °C, 5–15 s heat-up, seven airflow settings and a 0.1 g chamber in a titanium unibody with no battery.
Numbers first. The DynaVap UniDyn is a manual unit, so it has no battery to compare. Instead, it wins on size, weight and build. Here is how this dry herb vaporizer stacks up on paper.
A battery unit needs charging and has a screen. The UniDyn needs neither. You heat the BallR Cap with a small butane torch or an induction heater such as The Wand. Stainless-steel balls in the cap store heat for pure convection. Then a click signals it is ready, and a second click comes on cool-down. Heat-gradient markers show the right spot for the flame.
The UniDyn has a seamless titanium unibody with a scratch-resistant DuraDyn finish. It also has a five-part build, which keeps cleaning short. By contrast, the DynaVap HyperDyn is another model in the range, and the BallR Cap convection is sold on its own as well. So you can compare body and cap side by side.
A Thermal Break keeps the stem cool. To clean it, remove the O-rings and soak the metal parts in isopropyl alcohol. After that, it is ready again. Compared with a unit that holds a battery and a board, there are fewer parts here that can wear out. That is a clear plus when you weigh years of use.
Medgrow lists every dry herb vaporizer with the same spec format, so you can line them up. For the theory, see this vaporizer overview. The full Dynavap page shows all models.
Which heat source works? A small butane torch or an induction heater, for example The Wand.
How fine is the airflow control? There are seven settings on the condenser, and the airport hole adds more steps in between.